Centos6.0 :Failed to start SciDB!


#1

I followed the <<HowToInstallSciDB14.8>> to install SciDB14.8.I can initialize it successfully , but i can not start it.
what the scidb.log display is [ERROR]: Could not get the remote IP from connected socket to/frominstance 3. Error:107(‘Transport endpoint is not connected’)
I don’t how to deal,any help would be much appreciated


#2

Hi—
This error is probably caused by the failure to resolve one of the host names you entered into your “config.ini” file through DNS. Make sure the names you entered in the “config.ini” are properly formated and fully qualified. If that doesn’t help, you could try using raw ip addresses there to see if DNS is truly the source of the error.

Hope this helps.
–Steve F
Paradigm4


#3

[quote=“stevef”]Hi—
This error is probably caused by the failure to resolve one of the host names you entered into your “config.ini” file through DNS. Make sure the names you entered in the “config.ini” are properly formated and fully qualified. If that doesn’t help, you could try using raw ip addresses there to see if DNS is truly the source of the error.

Hope this helps.
–Steve F
Paradigm4[/quote]

Thank for your help